Flex Frame Sunglasses Case Tutorial


By Judith on May 15, 2017
0 Comments (Leave comment)

Hello everyone!  I hope you’ve had a wonderful weekend.

 

With all the sunshine we’ve been having lately, I thought it was time I shared my Sunglasses Case pattern with you.

 

 

If you are new to the world of ‘flex frames’ don’t worry, they are really easy to insert, and there are lots of pictures to help you along.

 

Of course you can use these handy cases for regular spectacles, they make lovely gifts too!

 

 

But a sunnies case is embracing of the imminent summer season and will get us all in the mood for when the sun comes out again!

 

Good To Know:

There are 2 sizes available.  This is because not all sunglasses fold flat.  If they do, like normal glasses then you need to make the narrower case using a 3.5″ flex frame (available from here).

 

 

However, if your sunglasses are wrap around ones (like mine), you will need to make the wider case using a 5″ flex frame. Now it’s a little more tricky to get hold of these within the UK.  However they are widely available from Hong Kong and China via Ebay (remember, Hong Kong is a country with a pre-paid Import charge agreement with the UK, so no customs charges will apply on your parcel).

The construction method is the same for both sizes.

 

 

So let’s get started.

 

You will need:

First of all, you will need to download the applique glasses template here.

3.5″ or 5″ Flex Frame

Narrow case: 2 x (4″ x 9″) each from outer fabric, lining fabric & sew-in vilene (heavy weight)

Wider case: 2 x (5.5″ x 9″) each from outer fabric, lining fabric & sew-in vilene (heavy weight)

Fabric for applique sunglasses (2.5″ x 5″)

Bondaweb (2.5″ x 5″)

Jewellery pliers or similar

Adjustable zipper foot (this makes sewing in the flex frame easier)

505 Basting spray (optional)

 

Method:

Assume 1/4″ seam allowances 

 

1. Spray baste the vilene to the wrong sides of the outer fabric pieces.  Using the template provided, trace onto the papery side of the bondaweb.

 

2. Iron the bondaweb to the wrong side of the applique glasses fabric. When cooled, cut out on the line.

 

 

3. Remove the paper backing and carefully iron the glasses to the right side of the outer fabric, centred and approx. 2.5cm (1”) up from the bottom edge.

 

 

4. Applique the glasses according to your preferred method. I used raw edge ‘sketch’ applique – for this you need to drop the feed dogs and attach a free motion/darning foot to your machine (you can get more information on how to do this & other machine applique techniques here.)

 

 

5. Put the 2 outer pieces right sides together and mark 6.75cm (2 5/8″) down from both top corners. Sew down both sides and the bottom edge from marker to marker, leaving the top open (this is the flex frame section).

 

 

6. Repeat step 5 for both lining pieces, leaving a 5cm (2”) gap in the middle of the bottom edge (for turning).

 

7. With right sides together, match the outer flaps to the lining flaps.

 

 

8. Carefully pin these sections as shown below, making sure to match the side seams.

 

 

9. Sew around the top unsewn section from pin to pin.  Use a reverse stitch to start and finish and take care not to sew into the existing seams.  Repeat for the other flap.

 

 

10. Carefully snip the corners at an angle to lessen the bulk.

 

 

11. Turn the pouch right side out through the gap in the lining. Push the corners well out and press flat. Hand or machine stitch the gap closed.

 

 

12. Push the lining down into the case. Fold back one of the ‘flaps’, pin and sew close to the outer edge to create a channel (an adjustable zipper foot is useful here).  Start and finish with a reverse stitch. Repeat for the other ‘flap’.

 

 

13. Insert the flex frame into the channels.

 

 

14. Push back the fabric to expose the open ends of the flex frame.  Slot the hinge together, insert the bar fully into the hinge, and then close the ends of the hinge using jewellery pliers.  Resettle the fabric along the flex frame.

 

 

Simples!

 

Pop in your sunglasses and enjoy!

 

 

Happy sewing!

Comments

0 Comments (Leave comment)

Flex Frame Sunnies Case!


By Richard Bleakley on June 3, 2016
0 Comments (Leave comment)

Apologies to my bloggy friends living in the East of England, but it has been full-on sunny here …. all week!  ALL WEEK!

And more to come!  Squeeee!

Pardon my excitement, but it only happens once a millennia here!

Timely then for my Flex Frame Sunglasses Cases to be published in Popular Patchwork this week.

Flex Frame Sunnies Pouch

 

The flex frames I use come in 2 sizes, 3.5″ and 5″.  My wraparound sunnies don’t fold flat, so if you have glasses like mine you will need to make the 5″ case.
Sunnies Cases (Popular Patchwork June16)

 

Some fun sketch applique on the front, easy assembly and you’ll have a sunnies case quicker than you can say ‘still can’t believe the weather we are getting!’
Flex Frame Sunnies Pouch

 

I love how these bright prints pop against the Essex yarn dyed (Denim) linen (more listed in my Etsy shop here).
Flex Frame Sunnies Pouch

 

So if you’ve still got some summer sewing prep to do, I promise these won’t take long!  Popular Patchwork (June) is in the shops now!
Sunnies Cases (Popular Patchwork June16)

 

Happy sunning!
Jude xo


Comments

0 Comments (Leave comment)