Patchwork Bibs!


By Judith on March 13, 2016
0 Comments (Leave comment)

Have you had a wonderful weekend?

The weather here has been positively balmy!!  15 degrees today (that was the average temperature last July)!

Following on from my Easter Bibs tutorial last week, I thought I’d show you some patchwork versions!

Baby Bibs Tutorial

 


These are great scrap buster projects, using 28 x 2.5″ squares (perfect for leftover jellyroll & binding strips).

Patchwork Bibs
Made with quilt leftovers – ‘Spring Walk’ by Little Cube

I used the same template as before, and quilted the patchwork front and towelling together, before sealing the raw edges with bias binding.

Patchwork Bibs
Made with leftover Bonnie and Camille jelly roll strips


These days there is a lovely selection of pretty bias and trims to choose from. Here’s a small selection I picked up locally.

Bias Binding
And if you don’t want to fuss with bias binding, quilt your patchwork front with a little wadding before following my original tutorial.
Baby Bibs Tutorial

These bibs took no time at all to make!  Wouldn’t they make gorgeous baby-shower gifts?
Patchwork Bibs

Whatever the occasion, I hope you are enjoying my Easter tutorials series.  More to come this week!
Linking up with Scraptastic Tuesday!
Jude xo

Comments

0 Comments (Leave comment)

Mother’s Day Pot Holder!


By Judith on April 11, 2017
3 Comments (Leave comment)

I realise Mother’s Day is a while ago now, but I haven’t told you about a wee make I made my mum!

 

Pot Holder
I have made mum pot holders before, and was pleased to see them put to good use in her kitchen recently.

 

But continuous use means they get a little ‘worse for wear’ over time. So I thought a replacement was in order.

 

I mainly store my scraps in colour order, in a tall drawer stacker! But when I have leftovers from a particular collection, I will keep them together.

 

I had one such little bag of small 2″ squares leftover from a quilt project a few years ago. I can’t remember which fabric collection these are from, but I had just enough to create 9″ square pot holder.

 

 

Instead of using Insul Bright Heat Resistant wadding, I tried an extra thick compressed wadding (sold in the shop where I teach as ‘oven glove wadding’!).

 

I increased the stitch length and was able to quilt through it no problem.  I love the firmness and texture from the thicker wadding.

 

Pot Holder

 

Curving the corners and adding co-ordinating bias binding & a loop finished this quick little gift.  It only took an afternoon!

 

Pot Holder

 

I love how this pot holder has turned out!  Can you believe I don’t have a single one in my own kitchen!  I really must make myself a few, especially as they don’t take long, and let’s face it, I have oodles of scraps to choose from!

 

Linking up this hot pot holder with the Scraptastic Tuesday queens, Nicky and Leanne!

 

Happy sewing!

 

Comments

3 Comments (Leave comment)

Denim Maker’s Tote


By Judith on June 18, 2017
6 Comments (Leave comment)

Hi everyone!

 

It’s getting pretty hot around here!

 

As I enjoy the wide open windows and the washing on the line, I’m also progressing well with packing up ready for moving house at the end of this month.  A small challenge when there’s 15 years worth of ‘stuff’ to thin out ready for our down-size!

 

I have also packed up my sewing room, but not before I got a class sample finished for classes in the new term.

 

Denim Maker's Tote (large)

 

I’m a great admirer of Anna’s fabulous bag designs and patterns, and her Maker’s Tote is a particular favourite of mine.  I’ve had it bookmarked for a while, but am only now getting around to making it!

 

Denim Maker's Tote (large)

 

I thought this would be a good bag pattern to teach in class because of the variety of bag construction elements and skills involved.

 

But of course I couldn’t just stick to the pattern, could I!

 

I love using denim for bags, it makes them more durable and useable in my view.  And besides, I already had 2 ‘uneven brick’ panels sewn together for another project long forgotten!  They were the perfect size, so I got to *quilting them, first in the ditches, and then some feature quilting using Aurifil 12wt wool thread.

 

*the original pattern uses a foam interfacing like Bosal to give structure and reinforcement to the bag.  I wasn’t able to get any in time, so substituted with a layer of wadding and heavy weight sew-in vilene spray basted together.

 

I used a size 100 Jeans needle for the quilting and construction

 

 

The front and back of my bag are slightly different.  I didn’t think the prescribed front pocket would work on my version of this bag, but I did include the zippered back pocket.

 

Denim Maker's Tote (large)

 

One of the joys of working with recycled denim is thinking of ways to use the loops, tabs and unusual features attached to a pair of jeans.

 

Self-covered button with vintage chintz

 

 

I decided my Maker’s Tote could be used as my everyday bag, not just a class sample, so I incorporated another one of my favourite textiles, vintage chintz linen.

 

Denim Maker's Tote (large)

 

A few vintage style Lecien prints coordinated beautifully for the internal pockets and facings.

 

Denim Maker's Tote (large)

 

The handles are made from a re-purposed denim belt, reinforced with webbing and lined with more of the chintz linen.

 

Denim Maker's Tote (large)

 

The belt was a little on the wide side, so by cinching in the edges along the top section, they are now the perfect fit for my hands and have lovely structure too!

 

Denim Maker's Tote (large)

 

The bag is finished off with self-made bias binding, another great skill to have under your belt.  If you follow me on Instagram, you will know that the first lot of bias binding I made is different to the one on the finished bag!

 

 

I decided I didn’t like choice no.1 (after I had attached it!). In my opinion the chintz linen binding works much better, even though it was a little trickier to attach.

 

So there we have my version of Noodlehead’s Maker’s Tote!  A fabulously roomy bag, gorgeous shape, and versatile elements.

 

And I’ll leave you with an ‘out take’ of the ‘helper’ on my photo-shoot!

 

Denim Maker's Tote (large)

 

Linking up to Nicky & Leanne’s Scraptastic Tuesday!

 

Happy Sewing!

Comments

6 Comments (Leave comment)

Improv. Curved Placemats Tutorial


By Judith on May 4, 2018
3 Comments (Leave comment)

In keeping with our ‘curves’ theme this term, my monthly ‘5 minute lesson’ in classes this week was all about Improv. (improvisational) curves.

 

As the name suggests ‘improv.’ means you pretty much go with the flow and make up the curves as you go.  No two curves are the same, and there are much fewer rules to abide by than with standard pieced curves. You don’t even have to worry about an even seam allowance (gasp!).

 

You can imagine how well this technique went down with all my rebellious non-conformists (you know who you are!!).

 

There are many examples of improv. curves on Pinterest (see my Curves Pinterest Board here).  And to give an example of these in class, I made some improv. curved placemats, in the lovely coastal Beachcomber fabrics by Makower.

 

Improv Curves Placemat tutorial (2)

 

Here is the tutorial on how to make my Improv. Curved Placemats (makes 4 x 15 1/4″ diameter mats).

 

You will need:

Between Nine and Twelve 10″ squares (I used Beachcomber by Makower)

50cm of Wadding or Insul Bright Heat Resistant Wadding

50cm of calico

1 metre of Heat Resistant Non-Slip Table Protector (at least 35″ wide)

4.5 metres of 3/4″ wide bias binding

Co-ordinating threads

505 Basting Spray

 

Method: Assume 1/4″ seams

1 Place 2 squares of fabric on the cutting mat, right sides facing up, and overlapping.  The wider the overlap, the deeper the curves can be.  I usually overlap by 2-3″ (I am using up a smaller piece of fabric here to overlap the 10″ square).

 

 

2 Using a rotary cutter, cut a curve up through the overlapped section.

 

 

3 Remove the excess pieces (this will be the smaller piece of the right hand fabric and the smaller/underneath piece of the left hand fabric). The remaining pieces should fit neatly together.

 

 

4 Sew the 2 pieces right sides together.  It is easier to do this by straightening the underneath piece with your right hand and lifting up the top piece with your left hand.  Don’t worry if your seam allowance isn’t even the whole way down, just make sure there are no tucks.

 

 

5 Press the seam to the darkest fabric.

 

 

6 Repeat steps 2-5 for a third piece of fabric, over lapping the left hand edge of the first piece.

 

 

7 Spray baste the curved pieces, wadding and calico together (tutorial on spray basting available here).

 

 

8 Quilt the mats, starting centrally and working towards the outer edges.  I quilted in the ditches and then’echo’ quilted the curved seams 1/2″ apart.

 

 

9 Place a round plate or bowl on top and draw around it.  Cut along the line and remove the excess.  Put to one side.

 

 

10 Place the same plate/bowl onto the felted side of the non-slip table protector.  Draw around it and cut out.

 

 

11 Machine tack the table protector to the wrong side of the mat, making sure the felted side is on the inside. Machine tacking means using a large stitch on your machine, and stitching close to the edges.  If you find the rubberised table protector resisting or sticking to your sewing machine, make sure the rubberised side is facing up and engage the dual feed/walking foot on your machine.  If you don’t have these, stick some matt scotch tape to the underside of your presser foot keeping clear of the needle opening.

 

 

12 Open out the bias binding, and leaving a few inches unsewn at the start, attach the binding around the edge of the mat using a scant 1/4″ seam allowance, stopping a few inches short at the end (remember to use a quilting size stitch length here, not a tacking stitch).

 

 

13 Place the end of the bias binding over the start and measure and mark 1/2″ overlap.  Trim off the excess.

 

 

14 Open out the binding and sew the short ends together using 1/4″ seam allowance.

 

 

15 Finger press the seam open and finish sewing down the remaining binding to the mat.

16 Snip all around the edge of the mat at 1cm intervals, taking care not to cut the stitches.

 

 

17 Push the binding over to the back of the mat.  Pin in the ditch from the front, making sure the binding is caught at the back.

 

 

18 Stitch in the ditch from the front side finishing with a reverse stitch.

 

 

And you’re finished!

Improv Curves Placemats

 

Adorn your table with your beautiful mats and wait for the compliments!

 

Improv Curves Placemats

 

So why not have a go at this organic and fun technique!

 

I hope you enjoy your venture into improv. curves!

 

Happy curving!

Comments

3 Comments (Leave comment)